The FOX TS 3 Z22 is an ATEX-certified IIIC industrial vacuum cleaner, therefore suitable for working with conductive metal powders. The vacuum is generated by an ATEX-certified side channel turbine, protected and silenced by the rear casing. The sucked material is conveyed into the front chamber, made of AISI 304 stainless steel, where the inert liquid inside it eliminates any ignition sources. The industrial vacuum cleaner is equipped with an additional filter with an anti-spark trap to avoid any danger of explosion. The material is then discharged from below through a ball valve. If desired, it is possible to use a container with solid/liquid separation for decantation in order to recover the sucked material for its reuse.
SUCTION UNIT
The suction unit is an ATEX certified side channel blower with direct coupling between motor and impeller. Furthermore, to guarantee safe work, the unit is equipped with a safety valve which, in the event of obstruction in the vacuuming elements, prevents overheating.
INLET
The vacuumed material enters the chamber through the inlet which is totally immersed in the inert liquid. In this way it is possible to vacuum metal dust IIIC and potentially explosive materials. Thanks to this system the probability of an external trigger is essentially inexistent. An inspection window allows the operator to keep the amount of liquid inside the hopper under control at all times. The AISI 304 stainless steel hopper prevents oxidation and guarantees better conductivity to eliminate electrostatic charges.
ANTI-SPARK TRAP
Inside the hopper is installed an anti-spark grid whose base is an AISI 304 stainless steel micro-perforated sheet and the upper part is made out of steel wool. It is an additional safety system to ensure that no spark passes through the chamber. The grill is removable and easily cleanable.
SAFETY FILTER
The vacuum cleaner is equipped with an M Class (EN 60335-2-69) safety filter to protect the operator's health and the blower. In the unlikely chance a particle of the collected material goes through the water it will be stopped. Furthermore, on the lid is installed a safety valve for the automatic discharge of hydrocarbon gases.
industrial vacuum FOX TS 3 Z22 II3D |
Technical data
Motor
Type
side channel blower
ATEX marking
II 3 D Ex htc IIIC T140°C Dc
Voltage
400
V
IP
65
Continuous vacuum
200
mBar
Maximum air flow
270
m3/h
Safety valve
included
Noise level
73
dB(A)
Frequency
50/60
Hz
Power
3
HP
Insulation class
F
Primary Filter
Media
antistatic polyester
Machine
Suction inlet
50
Ø mm
Dimensions
660 x 1200
mm
Height
1510
mm
Weight
140
Kg
Hopper
Acciaio INOX AISI 304
industrial vacuum FOX TS 3 Z22 II3D |
Accessories
P12378
ATEX starter kit Ø 50mm
Basic kit containing antistatic accessories for application with 50 mm diameter ATEX vacuum cleaner
P12377
ATEX kit PRO Ø 50mm
Kit containing antistatic accessories for application with 50 mm diameter ATEX vacuum cleaner
