INDUSTRIAL VACUUM
M 100 JetClean® LP
Single-phase Wet&Dry Industrial Vacuum Cleaners
The M 100 Jet Clean® LP is the most powerful cyclonic industrial vacuum cleaner of the single-phase series in Depureco's range. Thanks to the 3 By-Pass motors it is possible to reach the impressive power of 3.9 kW. The M65/100 Jet Clean® industrial vacuum cleaner works in all conditions: dust, chips, liquids difficult materials with hoses as long as several meters. As standard this vacuum cleaner is equipped with a 35,000 cm2 PTFE filter certified Class M by the BIA (Berufsgenossenschaftliches Institut für Arbeitssicherheit) with a filtration efficiency of 1 µ. The JetClean® filter cleaning system allows the filter to be cleaned using the pressure differential between the inside and outside of the vacuum cleaner.
The tangential inlet and protective jacket of the filter cartridge allow the cyclonic effect of dust to be used to slow it down and drop it inside the container, protecting the filter. The M 100 Jet Clean® LP vacuum cleaner is equipped with a Longopac system where The vacuumed material is automatically bagged. The product automatically falls into a high-strength transparent plastic disposable bag. The volume of the bag is decided by the operator who will seal and cut it without having contact with the sucked material. This makes it possible to work with fine and hazardous powders while ensuring the safety of the operator.
INDUSTRIAL VACUUM
M 100 JetClean® LP |
Highlights
SUCTION UNIT
The vacuum is generated by 3 by-pass motors. Each motor is managed by an independent switch, permitting the operator to control the intake performance. The motors are located in a sturdy casing, with an insulating sponge to maintain a low noise level.
FILTERING ELEMENT
The filtration is guaranteed by a sturdy polyester filtering cartridge. The cartridge is made to ensure large filter surface in a compact space. This way air can pass through when the filter is dirty too. The filter is M Class (BIA | EN 60335-2-69) certified. It stops the particles till 1 micron, preserving the motors and the operator.
Jet Clean® FILTER CLEANING SYSTEM
The vacuum cleaner is equipped with a new cleaning system named JetClean® designed by Depureco. Thanks to the different pressure between the outside and the inside of the vacuum cleaner, the system generates a jet flow inside the cartridge, detaching the dust from the filter surface. It is a fast and efficient way to keep the filter clean during the operations, without stopping the motors.
LONGOPAC®
The collected material is stocked inside a sturdy plastic bag named Longopac®. This bag is 20 meters long and it is rolled up at the bottom of the filter chamber. When the vacuum cleaner is stopped, the material automatically falls into the bag. When the bag is full the operator can seal it, cut it and safety store away the collected dust. Then it is possible to start with a new bag. This operation can be made without any contact between operator and material.
INDUSTRIAL VACUUM
M 100 JetClean® LP |
Technical data
Motor
Type | by-pass |
Voltage | 230 V |
Maximum vacuum | 250 mBar |
Maximum air flow | 570 m3/h |
Noise level | 72 dB(A) |
Engines | 3 |
Frequency | 50/60 Hz |
Power | 5,2 HP |
Primary Filter
Type | cartridge |
Class EN 60335-2-69 | M Class |
Media | PTFE |
Filter cleaning | Jet Clean |
Filtering efficiency (IFA) | IFABGIA M-PES |
Machine
Suction inlet | 70 Ø mm |
Dimensions | 660 x 800 mm |
Height | 1515 mm |
Weight | 70 Kg |
INDUSTRIAL VACUUM
M 100 JetClean® LP |
Options
AVAILABLE FILTER MEDIA
HEPA 14
Absolute filter (EN 1822)
28.000 cm² filter surface
H14 Class Filter (EN 1822)
Glass fiber
28.000 cm² filter surface
H14 Class Filter (EN 1822)
Glass fiber
STRUCTURE AND OPTIONS
100 Lt
100 Lt bin
AB
Accessories basket
BX
Stainless steel bin AISI 304
GRD
Grounding
KDP
Differential pressure KIT for bag
LP
Longopac bagging system
SD
Sliding damper
RC Schuko
Remote control by power tool (MAX 2000 W)
INDUSTRIAL VACUUM
M 100 JetClean® LP |
Accessories
P00327
Wet & Dry fixed brush ø 50mm
Wet & dry fixed accessory with 50 mm diameter flexible hose fitting
P11887
Wet & Dry Kit Ø 50mm
Kit containing specific accessories for 50 mm diameter solids and liquids vacuuming
P12350
Starter kit Ø 50mm
Basic kit containing specific accessories for 50 mm diameter solids and liquids vacuuming